IKON SK6 FP04 rim cylinder

IKON SK6 flat profile Vector FP04 rim cylinder

SK6 flat profile Vector FP04 is a high-quality IKON profile in special class SK6 with 6 active spring-loaded pin locking elements. This profile is based on a patent, which was specially developed as a measure against current and common opening techniques and makes them very difficult. The profile FP04 is designed as a paracentric profile and optionally has certifications according to DIN, VdS.

Measurements:

• mounting diameter: 29 mm
• rosette: Ø 46 mm
• case length: 27,5 mm
• for door thicknesses from 35 to max. 95 mm

Technical characteristics:

• 6 active spring-loaded pin locking elements for locking security
• paracentric key profile ensures unlocking security
• drilling protection class 1 (AB = 1) standard
• high protection against picking due to special profile design and pin combination
• core pins made of wear-resistant special bronze
• crowned cylinder core head with reinforced key insertion
• for door thicknesses from 35 to max. 95 mm
• protected key profile with security card

Execution:

• conventional locking system
• vertical key insertion
• cylinder body: brass matt nickel plated
• is screwed to a separate mounting plate from the inside with two M5 screws
• combination with electronic possible at any time using transponder key, also as subsequent extension

Key:

• key thickness: 3,6 mm
• nickel silver serrated key with square metal bow
• optional with coloured pins: these can indicate the assignment (e.g. locking authorisations) of the keys, simplifying key management

Operational area:

• garage locks, bar locks, can be combined with case locks
• private houses and apartments
• office and commercial areas

Scope of delivery:

• rim cylinder (type Z050) incl. 3 or more keys
• 2 screws M5 x 30
• 1 screw-on plate
• 1 support ring
• Security card