DORMAKABA penta double cylinder

SKU
KA.penta.DZ
Producer No. Kaba penta/DZ
€183.70
incl. VAT, excl. Shipping Cost
Delivery Time
3 - 4 weeks
factory profile
Please note that the delivery time may be extended for options marked with *!

Product settings

DORMAKABA penta double cylinder

The DORMAKABA penta system is a very flexible system and meets the highest security requirements both in the private sector and for large and complex installations. DORMAKABA penta offers a high level of security thanks to the sophisticated technology within the locking cylinder. This is achieved by 5 radial pin rows with up to 22 pin positions. High-quality materials such as low-wear chrome nickel steel for the pins and nickel silver for the key are also decisive. DORMAKABA penta locking cylinders are among the most secure on the market and protect against the most common opening methods.

DORMAKABA penta locking cylinders are part of an ergonomically correct reversible key system, which means that the DORMAKABA reversible key is inserted vertically into the cylinder channel.

Patent protection until 2033 and unlimited trademark protection

Basic length:

  • from 30/30 mm
  • measured from the middle of cam
  • extension 5 mm per side

Technical characteristics:

  • technical and patent copy protection offer high key copy protection
  • 5 radially arranged rows of hardened steel pins
  • up to 22 pin pairs per cylinder side in several rows on 85 possible positions
  • number of possible, theoretical individual blocks: 867 trillion
  • spring-loaded pairs of locking elements made of hardened steel, chemically nickel plated
  • standard drilling protection (hardened steel locking elements and a 4 mm thick fixing screw made of hardened steel additionally on each cylinder side in the cylinder body)
  • very high security against picking and the impact method
  • classic door cylinder in 17 mm Euro profile, core diameter: 15 mm
  • modular system design
  • tested according to DIN EN 1303:2015 locking security class 6, and in conjunction with pull-out protection rosettes or fittings the attack resistance class 2, in optional lamella design the cylinders also fulfil attack resistance class D according to DIN EN 1303 without protective fittings
  • certifications: DIN 18252-82 | VdS class B and BZ | Kitemark
  • other cylinder shapes: e.g. swiss round profile, oval profile

Execution:

  • ergonomically correct reversible key, i.e. the DORMAKABA reversible key is inserted vertically into the cylinder channel
  • easy key insertion due to new design of the locking elements
  • cylinder body: nickel plated brass
  • integration into electronic DORMAKABA locking systems with LEGIC clip possible at any time (retrofittable), mechanical lock remains unchanged
  • can be combined with DORMAKABA evolo mechatronic locking system

Key:

  • key thickness: 2,5 mm
  • reversible key made of high-quality nickel silver, low-wear
  • reversible key that is technically difficult to copy
  • the new coding on the tip of the key cannot be produced with conventional key cutting machines; if the coding is missing, a key cannot be inserted or turned
  • high breaking resistance
  • 3 different key types, standard key: smartkey (optional largekey, long bow)
  • colour clip standard: black (selectable from 12 colours)
  • new exclusive colour clips only for the DORMAKABA penta system: in elaborate 2-component plastic technology with glossy surface

Options / Special equipment:

  • different cylinder finishes
  • increased drilling protection according to VdS B, increased drilling and pulling protection according to VdS BZ
  • emergency and danger function (closing on both sides)
  • priority (the key locks from outside if there is a key inside) (on request)
  • freewheel (from 70 mm total length, on request)
  • weather protection
  • long bow with and without key clip
  • locking cams (on request)

Operational area:

  • interior doors, exterior doors, front doors, apartment doors
  • private houses and apartments
  • small and medium-sized enterprises
  • industrial and administrative buildings
  • public facilities such as schools or community buildings
  • large and complex locking systems

Scope of delivery:

  • double cylinder incl. 3 or more keys
  • 1 fixing screw M5 x 85 mm
  • Security card

Reversible key that is technically difficult to copy

The reversible key is technically difficult to copy. The keys are not coded by drilling, but by a special milling process that conceals the position of the coding on the key. The key is made of nickel silver and is highly resistant to breaking, has excellent sliding properties and lowest wear. New design of the locking elements allow the key to slide even more easily into the key channel.

High security against picking and the impact method

With the rapido method, conventional locking cylinders can be opened - without leaving any traces - with a specially made key and a hammer. The DORMAKABA penta system is protected against this.

DORMAKABA modular

The DORMAKABA modular system allows cylinders to be converted to other lengths or even other cylinder shapes on site with little effort. The locking system remains intact.
The inserted cylinder cores (inserts) can easily be used in other cylinder designs (half cylinders, knob cylinders, sheet metal mounting cylinders, etc.).

DORMAKABA penta reversible key
DORMAKABA penta reversible key
5 radially arranged pin rows
5 radially arranged pin rows
DORMAKABA modular
DORMAKABA modular

How to measure the cylinder length correctly?

You can also find help in determining the correct length in our Help Center for "Cylinder Gauge".

Standard drilling protection

The standard drilling protection is achieved by standard hardened steel locking elements and a hardened insert fixing screw (A). This design complies with DIN EN 1303 attack resistance class B.

DORMAKABA standard drilling protection

Increased drilling protection - VdS class B approval

By using additional steel elements in the body and insert, a higher resistance to drilling is achieved. Class B locking cylinders do not have an integrated pulling protection. In combination with a tested core protection fitting, attack resistance class D is achieved.


A = insert with two carbide length pins = BS
B = tungsten carbide stud
C = short insert fixing screw hardened at the front
D = long insert fixing screw hardened at the rear

Increased drilling protection VdS B

Increased drilling and pulling protection - VdS class BZ

By using additional steel elements in the body and insert, a higher resistance to drilling is achieved. The increased pulling protection values are achieved by means of a pulling protection pin.
The new DORMAKABA VdS cylinder protects against pulling even in tubular frame doors.
These cylinders can be used without protective fittings and achieve attack resistance class D without a tested core protection fitting.


A = insert with carbide pins = BS
B = tungsten carbide stud
C = bible screw
D = insert fixing screw hardened
E = steel lamella

Increased drilling and pulling protection VdS CC

Cylinder finishes:

  • standard finish: nickel plated (silver-coloured)
  • optional: brown medium, brass natural (gold-coloured), black
  • for individual design requirements
  • if desired, homogeneous appearance of door cylinder and fitting
Please note:
If a different cylinder finish, different from the standard finish, is ordered, extended production times may occur.
DORMAKABA finishesnickel plated
DORMAKABA finishesbrass natural
DORMAKABA finishesbrown medium
DORMAKABA finishesblack


Emergency and danger function

This function enables the locking cylinder to be blocked even if a key with blocking authorisation is inserted on the opposite side.

Emergency and danger function

Dust and insect protection (on request)

The new SIS element is optimised for use with Euro profile cylinders and offers effective protection against the penetration of dirt and insects into the key channel. The outside length of the cylinder is extended by approx. 3,5 mm.

The SIS unit can be easily retrofitted as it is decoupled from the body and is mounted directly on the rotor. As a result, only the cylinder insert needs to be replaced, the rest of the cylinder is not affected by the upgrade and can continue to be used 1:1.

If the cylinder front is to be level, the option dust and splash water protection must be selected.

Not available in conjunction with VdS versions.

The SIS cap is always chemically nickel plated.

Note:
This function is side-dependent. It is therefore necessary to select the respective cylinder side with dust and insect protection function when ordering. The double-sided version is possible.

Dust and insect protection

Dust and splash water protection

Cylinders with dust and splash water protection are equipped with a spring-loaded dust and weather protection cap with 2 spring-loaded sealing lips on the cylinder face. Every Euro profile cylinder can be equipped with this function. The outside and/or inside length of the cylinder is extended by approx. 5 mm in each case.

Dust and splash water protection is supplied in standard color nickel plated (silver color).

Cannot be used for cylinders with pulling protection devices and for protective fittings.

Note:
This function is side-dependent. It is therefore necessary to select the respective cylinder side with dust and splash water protection function when ordering. The double-sided version is possible.

Dust and splash water protection

Freewheel (on request)

The profile cylinders which have a freely rotating cam are designated as freewheel cylinders.
The cam can be moved 360° freely when no key is inserted.
When the key is inserted, the spring-loaded clutch engages in the cam. This then allows the cylinder to be closed in the conventional way with the key.

  • Usually only necessary for special panic or automatic locks. If in doubt, please check with the door manufacturer.
  • for multi-point locks with panic function: latch and bolt must be moved into the lock body when the door is closed with the handle. To ensure this, the cam must be able to turn freely.
  • in motor-driven locks and special escape door locks
  • restrictions possible in combination with other optional equipment
  • certified for transmission and anti-panic locks
  • from 70 mm total length possible
Freewheel

Special locking cams for profile cylinders (on request)

  • 2-fold cam (Biffar)
  • Mul-T-Lock pinion with 10 teeth cog

b = width of the locking cam

2-fold cam (Biffar)
Mul-T-Lock pinion

Largekey (clip and long bow):

  • long key bow with extended key neck
  • colour clip standard: black (selectable from 12 colours)
  • when using e.g. protective fittings with core pulling protection rosette

Long bow (armour bow):

  • reversible key with armour bow
  • when using e.g. security fittings with core pulling protection rosette and multiple locking systems
DORMAKABA largekey
Largekey (clip and long bow)
DORMAKABA long bow
Long bow (armour bow)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account