IKON R10 Reversible key RWS

IKON R10 security cylinders use an individual telescopic pin mechanism with inner and outer pin locking elements. For cylinder authorisation, both the inner and outer pin locking elements must be aligned simultaneously and produce a dividing line. The standard profile has 6 holes, five of them with a total of 10 core and 10 body locking elements pins. The patented eccentric pin is located in the sixth hole. The patented R-CLIP, together with the likewise patented eccentric pin in the cylinder, creates a further parting line. The R10 reversible key system fulfils to a high degree the requirement for technical key copy protection, as well as protection against unlocking and being unlocked.

This system is available for reorders only.

For new systems we recommend the
IKON R10 reversible key profile locking wave 2RWS series.

Technical characteristics:

10 locking elements in total
5 double-acting telescopic locking elements + 1 patented eccentric pin
patented, movable R-CLIP for scanning the special locking elements
drilling protection class 1 (AB = 1) standard
high protection against picking and impact key technology
high protection against illegal key copying
emergency and danger function as standard with double cylinder (lockable on both sides)
telescopic core and body pins in combined steel and brass design
cam made of break-proof, corrosion-resistant nickel silver profile
tested according to DIN EN 1303, DIN 18252 (double, half, knob cylinders)
protected key profile with security card

Execution:

reversible key system
horizontal key insertion
cylinder body: brass matt nickel plated
half cylinder: standard cam position 90° left, cam can be adjusted 8-fold in 45° angle

Key:

key made of special resistant nickel silver alloy
key with handy rounded plastic armour bow

Operational area:

private houses and apartments
office and commercial areas

Special equipment:

different cylinder finishes
increased drilling protection class 2 (AB = 2) / class 3 (AB = 3)
VdS certification (on request)

Cylinder finishes:

standard finishes: brass matt nickel plated
optional: brass matt brushed, brass polished
for individual design requirements
if desired, homogeneous appearance of door cylinder and fitting
There may be slight colour deviations between the displayed surfaces and the original colours.

Drilling protection:

Standard drilling protection (AB = 1):

for medium safety requirements
the first pair of steel pins
a carbide pin in the cylinder body is combined with several carbide elements in the cylinder core

Increased drilling protection class 2 (AB = 2):