WILKA 3VE

Technical details

• 6 pin locking elements, class 80
• 5 pin locking elements for short cylinders or asymmetrical cylinders (26,5 mm), class 70
• up to 12 profile control pins in two additional levels
• standard drilling protection (1 body pin and 1 core pin made of hardened steel)
• 1 stylus pin made of hardened steel for drilling protection
• special pins for picking resistance
• 1 special self-locking pin in the body
• highest patented key copy protection due to additional protector pin pair on the key and in the cylinder core
• made in Germany according to DIN 18252/DIN EN 1303

Cylinder finishes

• standard finish: brass matt nickel plated
• optional: brass polished, brass matt brushed, brass oxidized
• for individual design requirements
• if desired, homogeneous appearance of door cylinder and fitting
• Please note:
  If a different cylinder finish, different from the standard finish, is ordered, extended production times may occur.

Drilling protection IX (ABH IX)

• for profile cylinders on endangered doors in reversible key systems
• all safety locking pin pairs made of hardened special steel (nickel-plated)
• each core 2 stylus pins made of hardened special steel
• core with 2 hardened, nickel-plated steel pins for increased protection against pulling and drilling
• body with 2 hardened, nickel-plated steel pins for increased body drilling protection
• on one side at the outside of the cylinder
• not combinable with the option: seawater resistant version

Drilling protection X (ABH X)

• for profile cylinders on endangered doors in reversible key systems
• all safety locking pin pairs made of hardened special steel (nickel plated)
• each core 2 stylus pins made of hardened special steel
• core with 2 solid carbide pins for highest pulling and drilling protection
• body with 2 solid carbide pins for highest body drilling protection
• on one side at the outside of the cylinder
• not combinable with the option: seawater resistant version

Pulling protection: steel insert as tear-off protection (tear-off clip)

• steel insert integrated into the body as body breakaway protection
• not combinable with the option: seawater resistant version

Emergency and danger function

This function enables the lock cylinder to be locked even if a key with locking authorisation is inserted on the opposite side. With this option the cylinder is supplied with a free-running locking cam.

Resistant to seawater

• seawater-resistant version or for damp rooms (e.g. bathrooms, sauna, cold storage rooms...)
• locking cam and fastening screw made of brass
• knob cylinder with brass knob
• all pin locking elements made of brass (nickel plated)
• not combinable with the option: increased drilling protection (ABH IX / X) or pulling protection

Freewheel (on request)

The profile cylinders which have a freely rotating cam are designated as freewheel cylinders.
The cam can be moved 360° freely when no key is inserted.
When the key is inserted, the spring-loaded clutch engages in the cam. This then allows the cylinder to be closed in the conventional way with the key.

• Usually only necessary for special panic or automatic locks. If in doubt, please check with the door manufacturer.
• restrictions possible in combination with other special equipment
• this option includes the emergency and danger function