IKON SK6 FP04 knob cylinder

IKON SK6 flat profile Vector FP04 knob cylinder

SK6 flat profile Vector FP04 is a high-quality IKON profile in special class SK6 with 6 active spring-loaded pin locking elements. This profile is based on a patent, which was specially developed as a measure against current and common opening techniques and makes them very difficult. The profile FP04 is designed as a paracentric profile and optionally has certifications according to DIN, VdS.

Basic length

• from 30/30 mm
• short cylinders from 28/30 mm to max. 28/45 mm
• measured from the middle of cam
• extension 5 mm per side
• Ordering information: the knob is always located on the inside of the cylinder.

Execution

• conventional locking system
• vertical key insertion
• cylinder body and knob finish: brass matt nickel plated
• standard cam position (SST = 30°), other cam positions on request
• combination with electronic possible at any time using transponder key, also as subsequent extension

Operational area

• entrance doors, connecting doors, office doors, interior doors, exterior doors, apartment doors, apartment entrance doors, etc.
• private houses and apartments
• office and commercial areas

Technical characteristics

• 6 active spring-loaded pin locking elements for locking security
• paracentric key profile ensures unlocking security
• drilling protection class 1 (AB = 1) standard
• high protection against picking by special profile design and pin combination
• core pins made of wear-resistant special bronze
• crowned cylinder core head with reinforced key insertion
• cam made of break-proof, corrosion-resistant nickel silver profile
• tested according to DIN EN 1303, DIN 18252
• protected key profile with security card

Key

• key thickness: 3,6 mm
• serrated key made of nickel silver with square metal bow
• optionally with coloured pins: these can indicate the allocation (e.g. locking authorisations) of the keys, simplifies key management

Description of the additional options

Key with colour pin

• optionally with plastic pin in various colours
• simplifies key management
• can indicate the assignment (e.g. locking authorisations) of the keys

Options / Special equipment

• different cylinder finishes
• different knob designs, standard shape KNF = 2 (optional: KNF = 1F2, only knob finish: nickel silver)
• increased drilling protection class 2 (AB = 2)
• increased drilling protection class 3 (AB = 3)
• weather protection

Description of the additional options

Cylinder finishes

• standard finish: brass matt nickel plated
• optional: brass matt brushed, brass polished
• the cylinder knob is delivered in the selected cylinder finish
• for individual design requirements
• if a homogeneous appearance of door cylinder and fitting is desired
• There may be slight colour variations between the surfaces shown and the original colours.

Knob design

• standard knob shape KNF = 2: small conical knob Ø 28 mm
• optional knob shape KNF = 1F2: round knob with recessed grip Ø 42 mm, finish: anodised light metal
• the standard cylinder knob is delivered in the selected cylinder finish

Scope of delivery

• knob cylinder (type Z534) incl. 3 or more keys
• 1 fixing screw M5 x 85 mm
• security card

Manufacturer:
ASSA ABLOY Sicherheitstechnik GmbH
Berlin distribution
Attilastraße 61 – 67
12105 Berlin
www.ikon.de

How to measure the cylinder length correctly?
You can also find help in determining the correct length in our Help Center for "Cylinder Gauge".