ISEO CSR R9 Country camlock cylinder

ISEO CSR R9 Country camlock cylinder / lever cylinder

The ISEO System CSR R9 Country is a protected and registered reversible key profile. The profile cylinders have drilling protection in the body and core, the core pins are made of stainless steel. The cylinder has a body pulling protection. The nickel silver reversible keys are corrosion-free, wear-resistant, easy to handle and offer good locking convenience.

Key blanks of the CSR R9 Country profile series are not freely available in the trade.

Measurements

• clamping dimension (standard closing lever): 23 mm
• installation depth: 30,5 mm
• cylinder front: Ø 30 mm
• mounting hole: Ø 25,1 mm lateral reduced to 20,3 mm

Execution

• reversible key system
• horizontal key insertion
• cylinder body: matt nickel plated
• key can only be removed when closed
• locking by closing lever

Operational area

• letterboxes, cupboards, cloakroom lockers, safes, light poles or inspection flaps
• suitable for RENZ models 10, 11, 12, 13, 14 SA
• private houses and apartments
• office and commercial areas

Technical characteristics

• 9-pin system
• 2 rows of pins (one bottom and one side)
• drilling protection in body and core (two hardened pins and a hardened ball in the core, one hardened pin in front of the pin row in the body)
• stainless steel core pins
• profile pin for querying the trademark protection
• locking path: 90°

Key

• key thickness: 3 mm
• reversible key made of nickel silver
• corrosion-free, low-wear
• easy to handle and good closing comfort
• extended key neck
• key profile is protected and registered, no key blanks freely available in the trade

Options / Special equipment

• different closing lever variants
• Always indicate the desired locking path when ordering!

Description of the additional options

Locking paths

• locking path A: closed on the left, open on the top
• locking path B: closed on the right, open on the top
• locking path E: closed on the top, open on the left
• locking path F: closed on the top, open on the right

Scope of delivery

• camlock cylinder (type HRZ R9N) incl. 3 or more keys
• closing lever
• mounting nut M25x1
• security card

Manufacturer:
Iseo Deutschland GmbH
Wiesestraße 190
07548 Gera
www.iseo.com

How to change your camlock cylinder?
We explain in the video how to change your camlock cylinder easily and quickly with the help of our templates.
If it is necessary to adjust the mounting hole, use our template for adjusting the mounting hole. You can find the template in the "Downloads" section.