Comparison list
My Account IKON SK6 FP04 half cylinder
IKON SK6 flat profile Vector FP04 half cylinder
SK6 flat profile Vector FP04 is a high-quality IKON profile in special class SK6 with 6 active spring-loaded pin locking elements. This profile is based on a patent, which was specially developed as a measure against current and common opening techniques and makes them very difficult. The profile FP04 is designed as a paracentric profile and optionally has certifications according to DIN, VdS.
Basic length
- from 30/10 mm
- measured from the middle of cam
- extension in 5 mm steps
Execution
- conventional locking system
- vertical key insertion
- cylinder body: brass matt nickel plated
- standard cam position 90° left, other cam positions on request
- cam adjustable in 45° angle 8-fold
- combination with electronic possible at any time using transponder key, also as subsequent extension
Operational area
- connecting doors, office doors, interior doors, basement doors, garage doors, etc.
- private houses and apartments
- office and commercial areas
Technical characteristics
- 6 active spring-loaded pin locking elements for locking security
- paracentric key profile ensures unlocking security
- drilling protection class 1 (AB = 1) standard
- high protection against picking due to special profile design and pin combination
- core pins made of wear-resistant special bronze
- crowned cylinder core head with reinforced key insertion
- cam made of break-proof, corrosion-resistant nickel silver profile
- tested according to DIN EN 1303, DIN 18252
- protected key profile with security card
Key
- key thickness: 3,6 mm
- serrated key made of nickel silver with square metal bow
- optionally with coloured pins: these can indicate the allocation (e.g. locking authorisations) of the keys, simplifies key management
Description of the additional options
Key with colour pin
- optionally with plastic pin in various colours
- simplifies key management
- can indicate the assignment (e.g. locking authorisations) of the keys
Options / Special equipment
- different cylinder finishes
- increased drilling protection class 2 (AB = 2)
- increased drilling protection class 3 (AB = 3)
- weather protection
Description of the additional options
Cylinder finishes
- standard finish: brass matt nickel plated
- optional: brass matt brushed, brass polished
- for individual design requirements
- if a homogeneous appearance of door cylinder and fitting is desired
- There may be slight colour variations between the surfaces shown and the original colours.
Standard drilling protection (AB = 1)
- for medium security requirements
- the first pair of pins made of steel
- one carbide pin in the cylinder body is combined with several carbide elements in the cylinder core
Increased drilling protection class 2 (AB = 2)
- for increased security requirements
- increased protection against drilling due to additional hard metal pins in the cylinder core and cylinder body
Increased drilling protection class 3 (AB = 3)
- for high security requirements
- drilling protection in the cylinder core and cylinder body from a combination of several special elements made of hard metal
Weather protection
- corrosion-protected design
- cam and forend screw made of stainless material
- surface finish: matt chrome plated
Scope of delivery
- half cylinder (type Z532) incl. 3 or more keys
- 1 fixing screw M5 x 85 mm
- security card
Manufacturer:
ASSA ABLOY Sicherheitstechnik GmbH
Berlin distribution
Attilastraße 61 – 67
12105 Berlin
www.ikon.de
How to measure the cylinder length correctly?
You can also find help in determining the correct length in our Help Center for "Cylinder Gauge".