Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
ISEO GERA WS ISEO GERA WS padlock factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
ISEO CSR R9 Country ISEO CSR R9 Country half cylinder + ABUS padlock 86TI/45 factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- stainless steel core pins
- solid lock body made of TITALIUM™ special aluminium
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
-
ISEO GERA WS-MC ISEO GERA WS padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
ABUS Vitess.2000 ABUS Vitess.2000 padlock 86TI/45 factory profileDelivery Time: 2 - 3 weeksFeatures:
- massive lock body made of TITALIUM™ special aluminium
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
- Intop system for high technical copy protection
- 6 spring-loaded locking elements and up to 4 coding pins on two locking rows
- standard drilling protection BS01
- picking protection
-
ABUS Vitess.4000 ABUS Vitess.4000 padlock 86TI/45 factory profileDelivery Time: 3 - 4 weeksFeatures:
- massive lock body made of TITALIUM™ special aluminium
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
- Intop system for high technical copy protection
- 6 spring-loaded locking elements and up to 4 spring-loaded coding pins on two locking rows
- standard drilling protection BS01
- picking protection
-
ABUS Vitess.1000 ABUS Vitess padlock factory profileDelivery Time: 4 - 5 weeksFeatures:
- standard shackle height: 28 mm, Ø 8 mm
- case width: 50 mm
- Intop system for high technical copy protection
- 6 spring-loaded locking elements on one locking row
- standard drilling protection BS01
- picking protection
- padlock: ground brass, chrome plated
-
ABUS padlock 86TI without cylinder factory profileDelivery Time: 3 - 4 business daysFeatures:
- solid body made of TITALIUM™ special aluminum
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
Configure locking system 
Compare
