Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
ISEO GERA WS ISEO GERA WS half cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- standard drilling protection (ABS/A)
- according to DIN 18252/DIN EN 1303
-
DOM rs Sirius® DOM rs Sirius (RS7SI) half cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- nickel silver serrated key
- technical key copy protection "starline"
- high-grade drilling and pulling protection
- certified according to DIN EN 1303 160B0C6C
- certified according to SKG**
-
ISEO CSR R9 Country ISEO CSR R9 Country half cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- drilling protection
- pulling protection
- stainless steel core pins
-
ISEO GERA WS-MC ISEO GERA WS-MC half cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- magnetically coded reversible key system
- 5 pin locking elements
- 1 additional active springless pin
- 2 anti-picking pins in the cylinder core
- standard drilling protection
-
ISEO GERA WS-MC ISEO GERA WS-MC half cylinder modular factory profileDelivery Time: 1 - 2 weeksFeatures:
- modular design
- magnetically coded reversible key system
- 5 pin locking elements
- 1 additional active springless pin
- 2 anti-picking pins in the cylinder core
- standard drilling protection
-
DOM ix Teco® (7TE) DOM ix Teco® (7TE) half cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- reversible key with special high-low milling
- with additional stamped recess
- very high key copy protection
- cylinder body: brass, dull nickel
- optional modular design
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar half cylinder 2-in-1 factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
- drilling protection according to VdS B
- cylinder made of solid brass, dull nickel
-
ISEO GERA WS ISEO GERA WS padlock factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
DOM RS 8 DOM RS 8 half cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- serrated key with rib on the side
- very high key copy protection
- drilling protection according to VdS B+
- solid brass cylinder, dull nickel
-
DOM ix TwinStar DOM ix TwinStar half cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key with patented movable double roller
- very high key copy protection
- drilling protection according to VdS B+
- cylinder made of solid brass, dull nickel
Configure locking system 
Compare
