Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
IKON SK6 FP04 IKON SK6 FP04 padlock factory profileDelivery Time: 2 - 4 weeksFeatures:
- conventional locking system
- 6-pin system
- core pins made of wear-resistant special bronze
- reinforced key insertion
- steel shackle hardened and chrome plated
- with forced locking
-
IKON SK6 DP06 IKON SK6 triangular profile DP06 padlock factory profileDelivery Time: 2 - 4 weeksFeatures:
- conventional locking system
- 6-pin system
- standard drilling protection
- high protection against picking and bumping
- high protection against core pulling
- triangular profile grooves on long sides of the key
- steel shackle hardened and chrome plated
-
ISEO GERA WS ISEO GERA WS padlock factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
ISEO CSR R9 Country ISEO CSR R9 Country half cylinder + ABUS padlock 86TI/45 factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- stainless steel core pins
- solid lock body made of TITALIUM™ special aluminium
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
-
ISEO GERA WS-MC ISEO GERA WS padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
EVVA EPS-5 EVVA EPS-5 padlock H24 factory profileDelivery Time: 3 - 5 weeksFeatures:
- spring-loaded 5-pin system
- drilling protection
- manipulation control
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
-
EVVA Akura EVVA Akura padlock HM24 factory profileDelivery Time: 3 - 5 weeksFeatures:
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
- reversible key system
- drilling, pulling, picking and scanning protection
- combination with electronics possible
-
EVVA EPS-5 EVVA EPS-5 padlock H30 factory profileDelivery Time: 3 - 5 weeksFeatures:
- spring-loaded 5-pin system
- drilling protection
- manipulation control
- forced locking
- standard shackle height: 40 mm, Ø 10 mm
- case width: 53 mm
-
EVVA MCS EVVA MCS padlock HPM factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- carbide drilling protection
- picking and scanning protection
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
-
EVVA ICS EVVA ICS padlock HPM factory profileDelivery Time: 3 - 5 weeksFeatures:
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
Configure locking system 
Compare
