Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
ISEO GERA WS ISEO GERA WS camlock cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- locking path: 90°
- clamping dimension (standard closing lever): 25 mm
- installation depth: 30,5 mm
-
DOM rs Sirius® DOM rs Sirius (RS7SI) camlock cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- nickel silver serrated key
- technical key copy protection "starline"
-
ISEO CSR R9 Country ISEO CSR R9 Country camlock cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- drilling protection
- locking path: 90°
- clamping dimension (standard closing lever): 23 mm
- installation depth: 30,5 mm
-
ISEO GERA WS ISEO GERA WS padlock factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
DOM rs Sirius® DOM rs Sirius (RS7SI) padlock proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- clear shackle height: 32,5 mm, Ø 8,74 mm
- case width: 52 mm
- padlock: solid brass black chrome plated
- nickel silver serrated key
- technical key copy protection "starline"
- certified according to DIN EN 1303 160B0C6C
- certified according to SKG**
-
ISEO GERA WS-MC ISEO GERA WS camlock cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- locking path: 90°
- clamping dimension (standard closing lever): 25 mm
- installation depth: 30,5 mm
-
ISEO CSR R9 Country ISEO CSR R9 Country half cylinder + ABUS padlock 86TI/45 factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- stainless steel core pins
- solid lock body made of TITALIUM™ special aluminium
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
-
DOM ix Teco® (7TE) DOM ix Teco® (7TE) camlock cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with special high-low milling
- with additional stamped recess
- very high key copy protection
- cylinder body: brass, dull nickel
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar camlock cylinder 2-in-1 factory profileDelivery Time: 1 - 2 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
-
DOM RS 8 DOM RS 8 camlock cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- installation depth: 33,8 mm
- body length: 25,3 mm
- mounting hole: Ø 25 mm lateral reduced to 22,5 mm
- serrated key with rib on the side
- very high key copy protection
Configure locking system 
Compare
