Lock cylinder
Locking cylinders should be protected against breaking, drilling, pulling out and all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
ISEO GERA WS ISEO GERA WS camlock cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- locking path: 90°
- clamping dimension (standard closing lever): 25 mm
- installation depth: 30,5 mm
-
ISEO CSR R9 Country ISEO CSR R9 Country camlock cylinder factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- drilling protection
- locking path: 90°
- clamping dimension (standard closing lever): 23 mm
- installation depth: 30,5 mm
-
ISEO GERA WS ISEO GERA WS padlock factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
DORMAKABA penta DORMAKABA penta camlock cylinder BMZ 1031 factory profileDelivery Time: 3 - 4 weeksFeatures:
- locking path: 90°
- clamping dimension (standard closing lever): 25,5 mm
- installation depth: 35,7 mm
- reversible key that is technically difficult to copy
- high picking and impact protection
- modular system design
-
ISEO GERA WS-MC ISEO GERA WS camlock cylinder factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- locking path: 90°
- clamping dimension (standard closing lever): 25 mm
- installation depth: 30,5 mm
-
ISEO CSR R9 Country ISEO CSR R9 Country half cylinder + ABUS padlock 86TI/45 factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 9-pin system
- stainless steel core pins
- solid lock body made of TITALIUM™ special aluminium
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
-
ISEO GERA WS-MC ISEO GERA WS padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
DORMAKABA expert plus DORMAKABA expert plus camlock cylinder BMZ 1031 proprietary profile with production at the manufactorDelivery Time: 3 - 4 weeksFeatures:
- locking path: 90°
- clamping dimension (standard closing lever): 25,5 mm
- installation depth: 35,7 mm
- reversible key that is technically difficult to copy
- high picking and impact protection
- modular system design
-
DORMAKABA penta DORMAKABA penta padlock VHS 2001 factory profileDelivery Time: 3 - 4 weeksFeatures:
- standard shackle height: 24 mm, Ø 7 mm
- case width: 41 mm
- forced locking
- reversible key that is technically difficult to copy
- modular system design
- 5 radially arranged pin rows
-
DORMAKABA penta DORMAKABA penta padlock VHS 2010 factory profileDelivery Time: 3 - 4 weeksFeatures:
- standard shackle height: 30 mm, Ø 9 mm
- case width: 58 mm
- forced locking
- reversible key that is technically difficult to copy
- modular system design
- 5 radially arranged pin rows
Configure locking system 
Compare
