Lock cylinder
Locking cylinders shall be protected against breaking, drilling, pulling and against all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
DORMAKABA penta DORMAKABA penta half cylinder short factory profileDelivery Time: 3 - 4 weeksFeatures:
- half cylinder short: 25/14,5 mm
- reversible key that is technically difficult to copy
- high picking and impact protection
- standard drilling protection
- modular system design
- 5 radially arranged pin rows
-
ISEO GERA WS-MC ISEO GERA WS-MC half cylinder modular factory profileDelivery Time: 1 - 2 weeksFeatures:
- modular design
- magnetically coded reversible key system
- 5 pin locking elements
- 1 additional active springless pin
- 2 anti-picking pins in the cylinder core
- standard drilling protection
-
IKON SK6 DP06 IKON SK6 triangular profile DP06 padlock factory profileDelivery Time: 2 - 4 weeksFeatures:
- conventional locking system
- 6-pin system
- standard drilling protection
- high protection against picking and bumping
- high protection against core pulling
- triangular profile grooves on long sides of the key
- steel shackle hardened and chrome plated
-
DORMAKABA expert plus DORMAKABA expert plus half cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- reversible key that is technically difficult to copy
- 4 radially arranged pin rows
- high picking and impact protection
- standard drilling protection
- modular system design
-
ABUS Magtec.2500 ABUS Magtec.2500 half cylinder proprietary profile with production at the manufactorDelivery Time: 3 - 5 weeksFeatures:
- magnetic technology in the key and cylinder
- modular design as standard
- climate-neutral product
- cylinder body: Xerol
- increased drilling and pulling protection
-
DOM ix Teco® (7TE) DOM ix Teco® (7TE) half cylinder proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- reversible key with special high-low milling
- with additional stamped recess
- very high key copy protection
- cylinder body: brass, dull nickel
- optional modular design
-
EVVA Akura EVVA Akura half cylinder factory profileDelivery Time: 6 - 8 weeksFeatures:
- reversible key system
- magnetic copy protection (optional)
- modular design
- drilling and pulling protection
- picking and scanning protection
- combination with electronics possible
-
DOM ix TwinStar 2-in-1 DOM ix TwinStar half cylinder 2-in-1 factory profileDelivery Time: 2 - 3 weeksFeatures:
- reversible key with patented movable double roller
- 2-in-1 system
- very high key copy protection
- drilling protection according to VdS B
- cylinder made of solid brass, dull nickel
-
ISEO GERA WS ISEO GERA WS padlock factory profileDelivery Time: 4 - 6 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
EVVA EPS-5 EVVA EPS-5 half cylinder factory profileDelivery Time: 6 - 8 weeksFeatures:
- spring-loaded 5-pin system
- drilling protection
- manipulation control
- high wear resistance
- 3 levels of security: length and transverse profile, pin system
Configure locking system 
Compare
