ISEO GERA WS-MC half cylinder

SKU
IS.GERA.WS.MC.HZ
€70.75
incl. VAT, excl. Shipping Cost
Delivery Time
1 - 2 weeks
factory profile
Please note that the delivery time may be extended for options marked with *!

Product settings

ISEO GERA WS-MC half cylinder

ISEO GERA WS-MC is a magnetically coded reversible key system with security card. This system fulfils high security requirements thanks to the standard drilling protection and the 6-fold locking authorisation query. A special feature here is the active springless pin, which is only activated by the magnet in the key. The permanent magnet provides additional security against unauthorised key copies. The reversible keys made of nickel silver are corrosion-free, low-wear, easy to handle and offer good locking comfort.

Key blanks of the profile series GERA WS-MC are not freely available in the trade.

Basic length:

  • from 30/10 mm
  • measured from the middle of cam
  • extension in 5 mm steps

Technical characteristics:

  • 5 pin locking elements made of wear-resistant special brass
  • 1 additional active springless pin activated by permanent magnet in the key
  • 3 hardened cylinder pins in the core and 2 hardened cylinder pins in the body
  • 2 intersecting ribs in the centre of the core (paracentric profile)
  • 2 anti-picking pins in the cylinder core
  • standard drilling protection: three hardened steel pins in the core, 2 hardened steel pins in the body, on both sides
  • with trademark protection

Execution:

  • reversible key system
  • horizontal key insertion
  • cylinder body: brass matt nickel-plated
  • 2 magnets (1 magnet per key side)
  • cam made of sintered steel
  • cam adjustable in 8 positions

Key:

  • key thickness: 3,6 mm
  • reversible key made of nickel silver
  • horizontal key insertion
  • with permanent magnet
  • corrosion-free, low-wear
  • easy to handle and good closing comfort
  • no key blanks freely available on the market
  • optionally: key with colour pin

Special equipment:

  • increased drilling protection
  • modular design (please select the cylinder)
  • Other options are available in the modular design.

Cylinder version:

Operational area:

  • indoor and outdoor areas, in conjunction with DIN mortise locks, for lift and switch cylinders, garage doors, garden gates
  • simply structured properties such as law firms, doctors' practices, offices
  • residential buildings

Scope of delivery:

  • half cylinder incl. 3 or more keys
  • 1 fixing screw M5
  • Security card

Technical copy protection:

At the 3rd milling groove, there is a steel core pin or a magnet-equipped core pin and a springless body pin in the cylinder. A permanent magnet is located in the key at the 3rd milling groove. This interrogates the steel core pin or magnet-equipped core pin in the cylinder and pulls it into the locking position. If the permanent magnet is missing or in the wrong position, the pin is not attracted and therefore remains locked in the body channel.

How to measure the cylinder length correctly?

You can also find help in determining the correct length in our Help Center for "Cylinder Gauge".

Standard drilling protection:

  • three hardened steel pins in the cylinder core
  • 2 hardened steel pins in the body
  • on one side outside

Increased drilling protection:

  • one carbide pin in the core above the profile
  • two carbide pins in the body
  • 1. and 2. pair of pins with hardened steel core
  • on one side outside
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!