Lock cylinder
Locking cylinders shall be protected against breaking, drilling, pulling and against all other attacks.
Correct installation and appropriate selection of high-quality accessories such as mortise lock and security fittings are an indispensable "must".
Against the above mentioned methods of overcoming mechanical protection, locking cylinders with anti-drilling protection, core pulling blocking and pulling protection offer the necessary resistance. Against picking and the impact method, refined innards of the profile cylinders help. However, these are not visible "outside".
The cylinders are effectively protected against the above-mentioned methods of attack by fitting a burglar-resistant door plate or a fitting (also with integrated pulling protection).
Filter
Shopping Options
-
ISEO GERA WS-MC ISEO GERA WS padlock factory profileDelivery Time: 1 - 2 weeksFeatures:
- reversible key system with trademark protection
- 6 pairs of locking elements
- core pins made of special brass
- according to DIN 18252/DIN EN 1303
- shackle height: 30 mm
- case width: 54 mm
-
DORMAKABA expert plus DORMAKABA expert plus camlock cylinder BMZ 1031 proprietary profile with production at the manufactorDelivery Time: 2 - 3 weeksFeatures:
- locking path: 90°
- clamping dimension (standard closing lever): 25,5 mm
- installation depth: 35,7 mm
- reversible key that is technically difficult to copy
- high picking and impact protection
- modular system design
-
EVVA Akura EVVA Akura camlock cylinder MB27 factory profileDelivery Time: 6 - 8 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 27,7 mm
- installation depth: 32,7 mm
- reversible key system
- combination with electronics possible
-
WILKA Carat S3 WILKA Carat S3 padlock proprietary profile with production at the manufactorDelivery Time: 2 - 4 weeksFeatures:
- comfortable reversible key system
- highest patented key copy protection
- standard shackle height: 30 mm
- case width: 53 mm
-
WILKA Carat S1 WILKA Carat S1 padlock proprietary profile with production at the manufactorDelivery Time: 2 - 4 weeksFeatures:
- user-friendly serrated key system
- highest patented key copy protection
- standard shackle height: 30 mm
- case width: 53 mm
-
EVVA EPS-5 EVVA EPS-5 camlock cylinder MB23G factory profileDelivery Time: 6 - 8 weeks- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,4 mm
- installation depth: 31,4 mm
- for material thickness up to 17 mm
- spring-loaded 5-pin system
- drilling protection
- manipulation control
-
EVVA MCS EVVA MCS MB23G camlock cylinder factory profileDelivery Time: 6 - 8 weeksFeatures:
- magnetic code system
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,4 mm
- installation depth: 32,4 mm
- for material thickness up to 17 mm
- drilling protection
- picking and scanning protection
-
EVVA ICS EVVA ICS camlock cylinder MB23 factory profileDelivery Time: 6 - 8 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 27,2 mm
- installation depth: 32,2 mm
- for material thickness up to 17 mm
- patented concealed curve guidance
- drilling protection
- picking and scanning protection
-
EVVA 4KS EVVA 4KS camlock cylinder MB23G factory profileDelivery Time: 6 - 8 weeksFeatures:
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,4 mm
- installation depth: 31,4 mm
- for material thickness up to 17 mm
- patented springless curve technology
- picking and scanning protection
- drilling protection
-
WILKA SI6 WILKA SI6 padlock factory profileDelivery Time: 2 - 4 weeksFeatures:
- user-friendly serrated key system
- highest patented key copy protection
- standard shackle height: 30 mm
- case width: 53 mm
Configure locking system 
Compare
