EVVA MCS
MCS (Magnetic Code System) guarantees triple security through one magnetic and two mechanical codings. The permanent magnetisation holds constantly. The cylinder core contains 8 rotating magnetic rotors to which the 4 magnetic pills of the key are assigned. If is the key from keyway removed, they always assume a different position. Each magnetic pill can be magnetised differently on each side.
MCS is ideal for locking systems with high demands on perfection and security. Especially for objects where highly sensitive and irretrievable valuables have to be protected. For example in hospitals, airports and government buildings.
Locking system reserves can already be taken into account when planning the locking system.
Special features of the EVVA MCS system
- magnetic & mechanical coding
- modular design
- drilling protection
- picking and scanning protection
- impact key protection
- pulling protection
- certified according to DIN EN 1303:2015 16010C6D
- patent protection until 2035
- permanent magnets guarantee a long service life
- high wear resistance
- maximum key copying security
- each lock and each key is unique
- combination with electronics possible
- protection by security card
Filter
Shopping Options
-
EVVA MCS EVVA MCS double cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- carbide drilling protection
- pull-off and core pulling protection
- picking and scanning protection
- pulling and impact key protection
- modular design (SYMO)
-
EVVA MCS EVVA MCS half cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- carbide drilling protection
- pull-off and core pulling protection
- picking and scanning protection
- pulling and impact key protection
- modular design (SYMO)
-
EVVA MCS EVVA MCS MB19 camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,5 mm
- installation depth: 32,5 mm
- for material thickness up to 14 mm
- drilling protection
- picking and scanning protection
-
EVVA MCS EVVA MCS MB23G camlock cylinder factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,4 mm
- installation depth: 32,4 mm
- for material thickness up to 17 mm
- drilling protection
- picking and scanning protection
-
EVVA MCS EVVA MCS camlock cylinder MB30 factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- locking path: 90°, adjustable in 45° steps
- clamping dimension (H7233): 26,2 mm
- installation depth: 32,2 mm
- for material thickness up to 20 mm
- drilling protection
- picking and scanning protection
-
EVVA MCS EVVA MCS padlock HPM factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- carbide drilling protection
- picking and scanning protection
- forced locking
- standard shackle height: 30 mm, Ø 8 mm
- case width: 46 mm
-
EVVA MCS EVVA MCS half cylinder + ABUS padlock 86TI/45 factory profileDelivery Time: 3 - 5 weeksFeatures:
- magnetic code system
- carbide drilling protection
- solid lock body made of TITALIUM™ special aluminium
- standard shackle height: 32,5 mm, Ø 8 mm
- case width: 46,5 mm
- forced locking
Configure locking system 
Compare
